DIY E-Liquid | Forum » Nutella Recipe Assistance »

Administrators

Group logo of DIY E-Liquid

DIY E-LiquidForum → Nutella Recipe Assistance

Public Group
  • Profile picture of Kelly M Kelly M said 1 year, 9 months ago ago:

    I want to make nutella? I want to make it between 3ml to 6 ml finished batch. Suggestions needed.
    I have VG and nicotine PG base 36 mg. I have distilled water. Should I pick up some PG?
    I believe I have all the flavors that would go into nutella, if not I would go out and get more. I’m new to this and have been making small batches. Nothing I’ve made has been great, but it’s been ok to vape, not that nasty.

    I put drops in according to recipes but it always looks like a small amount. Maybe I should switch to ML.

  • Profile picture of Locutus-Borg Locutus-Borg said 1 year, 9 months ago ago:

    Kelly,
    Nutella’s ingredients are roasted hazelnuts, skim milk and a hit of cocoa. Assuming a 3ML batch, this is what I’d try first:
    10 drops TPA Hazelnut
    6 drops TPA Sweet Cream
    6 drops TPA Chocolate

    You will probably want to sweeten it some, so you could add a drop or two of stevia sweetener or two drops of TPA Marshmallow or TPA Cotton Candy. The result should be flavorings about 20% or so of the total mix. I don’t know what your target nicotine percentage is, but to get it down to 24% you should add .5ml of VG. This will also help to sweeten the juice and give you lots of vapor.

    Give that a shot and tweak it from there. Also, let the mixture sit for a day or heat it up in some hot water. Flavors change as the mixture matures.

    I hope this helps.

  • Profile picture of Kelly M Kelly M said 1 year, 9 months ago ago:

    Ok great, I have everything listed except for sweetner and cotton candy. I will let you know how it turns out. I’m waiting on some flavors from TPA, once they arrive I will get to mixing. I prefer make small batches as I’m still new to this.

  • Profile picture of Kelly M Kelly M said 1 year, 9 months ago ago:

    PS How much nicotine should I put in. My target is 18-24mg.

  • Profile picture of Locutus-Borg Locutus-Borg said 1 year, 9 months ago ago:

    Here’s a complete recipe that yield 18.7mg strength.
    Recipe: Nutella
    Amount: 3 ml (based on 30 drops / ml)

    Nicotine liquid 1: 36mg PG Base 36mg/ml 52% 1.6ml 48 drops
    VG: Plain VG 15 % 0.5 ml 15 drops
    Flavoring 1: TPA Hazelnut 10 % 0.3 ml 9 drops
    Flavoring 2: TPA Sweet Cream 8 % 0.2 ml 6 drops
    Flavoring 3: TPA Chocolate 8 % 0.2 ml 6 drops
    Flavoring 4: TPA Marshmallow Or Cotton Candy 2 % 0.1 ml 3 drops
    Overall nicotine strength: 18.7 mg/ml

    If you leave the VG out completely and add more of your 36mg PG nic juice, it will end up about 24%.

    When you do a mix, put your flavorings in FIRST, then add the unflavored VG or PG and put the Nic juice in last, then shake the living shit out of it.

  • Profile picture of Kelly M Kelly M said 1 year, 9 months ago ago:

    Thanks. I didn’t realize I could use pg nic juice by itself. Yeah! My order from TPA should be here soon.

  • Profile picture of Locutus-Borg Locutus-Borg said 1 year, 9 months ago ago:

    Just to be clear, and to be safe, 36mg Nic juice is as strong as you want you used by just throwing some flavoring in it and vaping it. I wouldn’t try it with 48mg or higher strength because of the dangers of nicotine poisoning. Even at 36mg, if you get some on your skin, you want to wash it off immediately.

  • Profile picture of David Jarrett David Jarrett said 1 year, 9 months ago ago:

    Just out of curiosity, what’s the difference between TPA Marshmallow and TPA Cotton Candy compared to just using Ethyl Maltol, which I believe TPA indicates is what they are actually using to make up their cotton candy, in a 10:1 ratio?

  • Profile picture of Locutus-Borg Locutus-Borg said 1 year, 9 months ago ago:

    Dave, I can’t tell much difference between Cotton Candy and Marshmallow flavor wise..maybe the marshmallow imparts a slight flavor to the mix along with sweetness. I’ve never tried to use Ethyl Maltol straight. Marshmallows have corn syrup and vanilla in them, which would account for the slight flavor.

  • Profile picture of Kelly M Kelly M said 1 year, 9 months ago ago:

    Ok I made this and it’s totally colorless. Is this correct? Because all TPA flavors I received today have no color.

  • Profile picture of Locutus-Borg Locutus-Borg said 1 year, 9 months ago ago:

    Yes, that’s fine Kelly and totally normal. Most recipes you make in larger quantities will gradually change color over time.

  • Profile picture of Robert Lew wonton said 1 year, 9 months ago ago:

    that’s amazing how close to my attempt at Nutella was.
    no nic:
    3oz VG
    11 drops TPA Hazlenut
    3 Drops TPA Chocolate
    3 Drops TPA Malted Milk
    3 Drops TPA Marshmellow
    3 drops Sucralose Sweetener

    Shake it up and let it rest for a day or two and it’s awesome.

  • Profile picture of Locutus-Borg Locutus-Borg said 1 year, 8 months ago ago:

    Nice touch with the Malted Milk. Great idea.

  • Profile picture of Tasha Tasha said 5 months ago ago:

    Loved the Nutella recipe. Taste just like Nutella This is the only flavor I vape now. Thanks for sharing, I have been looking for awhile. Im glad I came across this site. Thanks again!

You need to log in or to participate in this forum topic.

HTML Codes